How To Use A Reciprocating Saw To Cut Tree Roots

Are you struggling to cut your tree roots, but don’t know how to do it? Then you are in the right place. Because in this article I am going to tell you how to use a reciprocating saw to cut tree roots.

A reciprocating saw is a machine-powered saw which cuts different types of things with a blade. It can cut through sturdy material like fiberglass, tree roots, metal, nails, and many other things without any problem depending on the blade. If your blade is steady and good in quality, then it’s going to do the job easily. But if it’s not, then it will take a long time to make a single cut, and overall the cut isn’t going to be very smooth. Using a reciprocating saw is very simple. You only have to push and pull the blade back and forth to cut.

Now that we know what a reciprocating saw is and how it works, let’s start working. But before that, we need to prepare some things. These are-

  • Shovel
  • Bimetal wood and nail blades
  • Safety goggles
  • And of course, a reciprocating saw

If you have all the things needed in the home, you are good to go. But if you don’t, then collect these things, and let’s learn how to cut tree roots with a reciprocating saw step by step.

Step 1:

First of all, you have to dig the soil around the tree about 12 inches to expose the roots. Once you see the roots fully, plan which route you want to cut. Because randomly cutting them will damage the tree, and there is a chance of it to die. So, carefully plan which root you need to cut.

Step 2:

Once you are done planning, it is time to take the safety steps. There’s a high chance of you getting hurt if you don’t take safety carefully. While cutting the roots, different kinds of crumbs and dirt may fly into your eyes, and if that happens, this will cause serious injury to your eyes. So be careful while doing this task and wear goggles for your safety.

Step 3:

After deciding which root to cut, mark it with chalk or spray paint, leaving a gap on the root. Doing this will help you keep a distance between the tree and the part of the root that you will cut. Take your reciprocating saw and click the safety off. After that is done, put the saw in the marked area and press it. The saw will slowly cut as you press it onto the root. Continue to push it until the root is fully cut. The saw may go into the soil to completely cut the root. And that is fine as long as there is not any hard rock in the soil. If there’s any, then the blade of the saw might get damaged or broken.

Step 4:

After you are done cutting the roots, fill up the hole with some soil. Or you can plant some flowering trees or grass seeds.

Some popular Questions and their Answers:

  1. Is reciprocating saw good to cut tree roots?

It depends on the blade. Reciprocating saw can cut many solid materials depending on your blade. If your blade is old and low in quality, then it might not be able to cut through hard surfaces.

  1. How do I know which root to cut without much damaging the tree?

This is a really important part. Cutting roots without knowing which one to cut may harm the tree. So we must plan where we need to cut. You first need to measure the trunk of the tree’s diameter in inches; after doing that, you have to multiply that number by eight. And the outputs will be the closest place to cut the root safely without much damaging the tree.

  1. Which reciprocating saw blades should I use to cut tree roots?

It depends on different persons and their preferences. But if someone asks me to suggest a blade, I recommend BOSCH 5-PIECE 12-INCH 5 TPI WOOD CUTTING RECIPROCATING SAW BLADES RP12. Because-

  • It is specially designed for first and extreme cutting.
  • Cuts with a smooth finish
  • Reasonable pricing
  • It is designed with Turbo-teeth technology that makes it long-lasting and very durable of all the blade set
  • This set of blades offers many types of blades that can be used to cut different types of material other than cutting tree roots.

These branded reciprocating saw blades are incredible. RP125 modeled reciprocating saw set last 3x longer than regular blades. The 5 blades in this set are color-coded, so you don’t have to worry about mixing them up all the time. And at the same time, this system makes it convenient to use. It only weighs 9 ounces. So there is no problem carrying it around in your workplace. You can cut many hard materials like cement board, metal, stainless steel, cinder block, cement board, fiberglass, wood, or nails with this set. And the best part is that it has 30 days money-back guarantee.

So if you want a product that can cut through anything that comes in its way, is very durable, and is well designed, then consider buying this Bosch branded set of the reciprocating saw blade. Its price is also under budget. So you don’t have to worry about spending extra money on buying a blade.

Conclusion

How to use a reciprocating saw to cut tree roots? In this article, I tried my best to cover up the things you need to know before using a reciprocating saw to cut tree roots. I hope this was helpful to you. Cutting tree roots is easy. But don’t forget to wear your safety equipment before cutting, or else you might get seriously injured. Also, be careful with the sharp knife; it can cut your hands. But if you don’t feel.

Confident enough to do this yourself, or if the root is too big for you, it would be a better choice to seek a professional’s help as they are more experienced in this field.

Jacob Bean

Jacob Bean

Hi There, This is Jacob, a Professional woodworker since 2005. I created this blog to share my whole life woodworking experience. stay touch with me here and twitter.

Write a Reply or Comment

Your email address will not be published. Required fields are marked *

shares